Water-cooled high-pressure compressors in the GIB-SP-series in the pressure range 50 – 520 bar – for heavy-duty operation in industrial applications

BAUER GIB 26-SP water-cooled, high-pressure compressor
BAUER GIB 26-SP water-cooled, high-pressure compressor

Cooling of valve heads reduces thermal load: For minimum wear

Installation even under the most difficult ambient conditions: Thanks to dedicated water cooling of the compressor block

Low compression temperatures and operating temperatures: thanks to a multi-stage compression process

Fully equipped: with soft starting and B-CONTROL II

The combination of the screw compressor and high-pressure booster enables a high level of free air delivery with compact dimensions. The compression process involves 3 respectively 5 stages, keeping compression temperatures to a minimum.

By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water.

As a result, these industrial high-pressure compressors require very little maintenance and achieve long service lives. At the same time, they are quieter than comparable air-cooled compressors and designed specifically for continuous use in industrial applications (heavy-duty use).

All the information you need at your fingertips!

Display B-CONTROL II
Display B-CONTROL II

B-CONTROL II
The BAUER B-CONTROL II is the advanced version of the B-CONTROL MICRO basic compressor control. Read More

BK 23 compressor block
BK 23 compressor block

Compressor block
For compressor units with intake pressure, the BK 23 to BK 52 block series feature a pressure-tight crankcase for uniform absorption of the internal gas forces. Read more

Screw booster concept
Screw booster concept

Screw booster concept
The BAUER GIB-SP-series forms a compact, structural unit and comprises a combination of a screw compressor and a high-pressure booster. The continuous shaft allows the motor to operate the V-belt driven screw compressor and the direct-coupled booster at the same time. Read more

Water cooling (heat exchanger)
Water cooling (heat exchanger)

Water cooling
By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water. This maintenance-friendly cooling concept is suitable in particular for difficult spatial and ambient conditions where it would not be possible to use an air-cooled compressor.

Special colours
Special colours

Colour range
Customer-specific paint finishes in other colours or special composition paints (conforming to corrosivity category C5M, for example) are available alongside the standard BAUER paint finishes.

Start-up configuration
Start-up configuration

Start-up configuration
At and above motor power ratings of 75 kW and in conjunction with the B-CONTROL, a soft starter to protect the unit during starting and effectively reduce starting current is used as standard. The technical alternative is soft staring with a frequency inverter. Read more

Monitoring of intermediate pressures and temperatures
Monitoring of intermediate pressures and temperatures

Monitoring of pressure and temperature
This add-on module for the B-CONTROL control monitors the pressures and temperatures of all compressor stages. Read more

B 2000 storage system
B 2000 storage system

Storage systems
Modular high-pressure storage systems by BAUER KOMPRESSOREN are the ideal way to expand a compressor system. Read more

Plate heat exchanger set
Plate heat exchanger set

Plate heat exchanger set
The plate heat exchanger set can be used to build a dedicated enclosed compressor cooling water circuit. In open cooling systems with stream water or sea water or open cooling towers, this is essential in order to operate the compressor with cooling water of suitable quality.

Heat exchanger set
Heat exchanger set

Heat exchanger set
The set consists of an air-to-water heat exchanger which makes it possible to operate water-cooled compressor units independently of a water supply.

Scope of delivery, basic version
Scope of delivery, basic version

Scope of delivery, basic version
Complete compressor unit ready for operation. Read more

GIB-SP series, water-cooled compressors, 110 / 365 / 420 / 520 / 520 bar
Type
designation
Effective
free air delivery ¹
Max. operating
pressure ²
Number of
compressor stages
Speed
approx.
Motor
output
Power
consumption ¹
Net weight approx.
  l/min m³/h cfm bar psig   rpm kW kW kg lbs
GIB 26.7-SP-110 15000 900 530 110 1600 3 1485 315 260 4600 10200
GIB 26.12-SP-365 10400 624 367 365 5300 5 1485 250 213 4400 9700
GIB 26.12-SP-420 10400 624 367 420 6100 5 1485 250 220 4400 9700
GIB 26.12-SP-520 10400 624 376 520 7540 5 1485 250 227 4400 9700

¹ Free air delivery according to ISO 1217, power consumption at maximum final pressure under certain conditions. Other ambient conditions result in different performance data. Direct-coupled units: Values valid for 50 Hz.
² Max. operating pressure = max. safety valve pressure setting; reduced switch-off pressure.